AP Physics C Mechanics · Experimental Design and Analysis

Rotational inertia lab: AP Physics C Mechanics FRQ Practice

2 versions of one AP Physics C Mechanics free-response question of the Experimental Design and Analysis type, each with a 10-point rubric and a full solution. Write your response on paper before you open the rubric.

These are PhysicsLearn originals written in the AP style, not released exam questions. Topics: 5.4 Rotational Inertia; 5.6 Newton's Second Law in Rotational Form.

Version 1

A student applies a measured tangential force to a low-friction wheel at radius 0.08 m. One trial uses force 1.5 N and produces angular acceleration 3 rad/s^2.

  1. Part A. Design a procedure to measure the wheel's rotational inertia using several applied forces.
  2. Part B. Choose graph axes that make rotational inertia measurable. Interpret slope and a nonzero intercept.
  3. Part C. Ignore resistive torque for the sample trial. Calculate applied torque and rotational inertia. State why the full graph is better.
Show the rubric and solution

Part A: 4 points

Apply measured tangential forces at a fixed measured radius, record angular acceleration, and calculate each applied torque as rF.

Use at least five torque settings while keeping the wheel configuration unchanged.

  • 1 point. Identifies applied torque as the independent variable.
  • 1 point. Identifies angular acceleration as the dependent variable.
  • 1 point. Explains how torque is determined.
  • 1 point. Collects multiple trials.

Part B: 3 points

From tau_applied = I alpha + tau_resistive, plot applied torque vertically against angular acceleration horizontally.

The slope is I. A positive vertical intercept estimates the magnitude of resistive torque.

  • 1 point. Chooses torque versus angular-acceleration axes.
  • 1 point. Identifies slope as rotational inertia.
  • 1 point. Interprets a nonzero intercept as resistive torque.

Part C: 3 points

tau = rF = 0.12 N m and I = tau/alpha = 0.04 kg m^2.

A best-fit line uses several torques and can reveal a frictional intercept instead of hiding it in one trial.

  • 1 point. Calculates the sample torque.
  • 1 point. Calculates the sample rotational inertia.
  • 1 point. Explains the advantage of multiple torques and a best-fit line.

Version 2

A student applies a measured tangential force to a low-friction wheel at radius 0.1 m. One trial uses force 1.9 N and produces angular acceleration 4 rad/s^2.

  1. Part A. Design a procedure to measure the wheel's rotational inertia using several applied forces.
  2. Part B. Choose graph axes that make rotational inertia measurable. Interpret slope and a nonzero intercept.
  3. Part C. Ignore resistive torque for the sample trial. Calculate applied torque and rotational inertia. State why the full graph is better.
Show the rubric and solution

Part A: 4 points

Apply measured tangential forces at a fixed measured radius, record angular acceleration, and calculate each applied torque as rF.

Use at least five torque settings while keeping the wheel configuration unchanged.

  • 1 point. Identifies applied torque as the independent variable.
  • 1 point. Identifies angular acceleration as the dependent variable.
  • 1 point. Explains how torque is determined.
  • 1 point. Collects multiple trials.

Part B: 3 points

From tau_applied = I alpha + tau_resistive, plot applied torque vertically against angular acceleration horizontally.

The slope is I. A positive vertical intercept estimates the magnitude of resistive torque.

  • 1 point. Chooses torque versus angular-acceleration axes.
  • 1 point. Identifies slope as rotational inertia.
  • 1 point. Interprets a nonzero intercept as resistive torque.

Part C: 3 points

tau = rF = 0.19 N m and I = tau/alpha = 0.048 kg m^2.

A best-fit line uses several torques and can reveal a frictional intercept instead of hiding it in one trial.

  • 1 point. Calculates the sample torque.
  • 1 point. Calculates the sample rotational inertia.
  • 1 point. Explains the advantage of multiple torques and a best-fit line.

Keep going