AP Physics 1 · Experimental Design and Analysis

Pendulum lab for g: AP Physics 1 FRQ Practice

2 versions of one AP Physics 1 free-response question of the Experimental Design and Analysis type, each with a 10-point rubric and a full solution. Write your response on paper before you open the rubric.

These are PhysicsLearn originals written in the AP style, not released exam questions. Topics: 7.2 Frequency and Period of SHM; 7.3 Representing and Analyzing SHM.

Version 1

A student wants to determine local gravitational acceleration with a pendulum. A best-fit line through the student's transformed data has slope 4.178 s^2/m. One trial uses length 0.5 m and period 1.445 s.

  1. Part A. Design a procedure that collects enough data to determine g. Identify variables and an uncertainty-reduction step.
  2. Part B. State what should be graphed for a linear model and derive the slope relationship.
  3. Part C. Use the best-fit slope to calculate g and describe one way to reduce random timing uncertainty.
Show the rubric and solution

Part A: 4 points

Vary pendulum length, keep the bob and small release angle fixed, and measure the period for at least five lengths.

For each length, time several oscillations, divide by the number of oscillations, and repeat at least three times before averaging.

  • 1 point. Identifies pendulum length as the independent variable.
  • 1 point. Identifies period squared as the transformed dependent variable.
  • 1 point. Names relevant controlled variables.
  • 1 point. Specifies repeated trials.

Part B: 3 points

From T = 2pi sqrt(L/g), squaring gives T^2 = (4pi^2/g)L.

Graph T^2 vertically against L horizontally. The best-fit slope is 4pi^2/g, measured here as 4.178 s^2/m.

  • 1 point. Uses timing over multiple oscillations.
  • 1 point. Chooses the linearized graph axes.
  • 1 point. Derives the slope model.

Part C: 3 points

g = 4pi^2/slope = 9.45 m/s^2.

Repeat each measurement and average the periods. Timing several oscillations also makes reaction time a smaller fraction of the measured interval.

  • 1 point. Uses the measured best-fit slope.
  • 1 point. Calculates the experimental value of g.
  • 1 point. Explains a valid random-uncertainty reduction.

Version 2

A student wants to determine local gravitational acceleration with a pendulum. A best-fit line through the student's transformed data has slope 4.091 s^2/m. One trial uses length 0.7 m and period 1.692 s.

  1. Part A. Design a procedure that collects enough data to determine g. Identify variables and an uncertainty-reduction step.
  2. Part B. State what should be graphed for a linear model and derive the slope relationship.
  3. Part C. Use the best-fit slope to calculate g and describe one way to reduce random timing uncertainty.
Show the rubric and solution

Part A: 4 points

Vary pendulum length, keep the bob and small release angle fixed, and measure the period for at least five lengths.

For each length, time several oscillations, divide by the number of oscillations, and repeat at least three times before averaging.

  • 1 point. Identifies pendulum length as the independent variable.
  • 1 point. Identifies period squared as the transformed dependent variable.
  • 1 point. Names relevant controlled variables.
  • 1 point. Specifies repeated trials.

Part B: 3 points

From T = 2pi sqrt(L/g), squaring gives T^2 = (4pi^2/g)L.

Graph T^2 vertically against L horizontally. The best-fit slope is 4pi^2/g, measured here as 4.091 s^2/m.

  • 1 point. Uses timing over multiple oscillations.
  • 1 point. Chooses the linearized graph axes.
  • 1 point. Derives the slope model.

Part C: 3 points

g = 4pi^2/slope = 9.65 m/s^2.

Repeat each measurement and average the periods. Timing several oscillations also makes reaction time a smaller fraction of the measured interval.

  • 1 point. Uses the measured best-fit slope.
  • 1 point. Calculates the experimental value of g.
  • 1 point. Explains a valid random-uncertainty reduction.

Keep going