AP Physics 2 · Translation Between Representations

Ohmic resistor data: AP Physics 2 FRQ Practice

2 versions of one AP Physics 2 free-response question of the Translation Between Representations type, each with a 12-point rubric and a full solution. Write your response on paper before you open the rubric.

These are PhysicsLearn originals written in the AP style, not released exam questions. Topics: 11.3 Resistance, Resistivity, and Ohm's Law; 11.4 Electric Power.

Version 1

A resistor is tested at three potential differences. The measured pairs (current, voltage) are (0.25 A, 2 V), (0.5 A, 4 V), and (0.75 A, 6 V).

  1. Part A. Describe a graph that tests whether the device is ohmic. State the expected shape and slope meaning.
  2. Part B. Use the graph model to write the governing equation and calculate the three currents.
  3. Part C. Explain how increasing voltage changes current, then calculate power at 6 V and check it against the graph.
Show the rubric and solution

Part A: 4 points

Plot voltage vertically against current horizontally. An ohmic resistor gives a straight line through the origin.

The slope deltaV/deltaI is the resistance, 8 ohms.

  • 1 point. Chooses voltage versus current axes.
  • 1 point. Identifies a straight line through the origin.
  • 1 point. Connects graph slope to resistance.
  • 1 point. Calculates the graph slope.

Part B: 4 points

Ohm's law is V = IR. With R = 8 ohms, the currents are 0.25 A, 0.5 A, and 0.75 A.

The equal ratios V/I show that the same linear model describes all three points.

  • 1 point. Writes Ohm's law.
  • 1 point. Calculates the first current.
  • 1 point. Calculates the second current.
  • 1 point. Calculates the third current.

Part C: 4 points

For constant resistance, current rises in direct proportion to voltage.

P = VI = (6 V)(0.75 A) = 4.5 W. The graph also gives V/I = 8 ohms.

  • 1 point. Relates voltage and current proportionally.
  • 1 point. Uses the electrical power equation.
  • 1 point. Calculates power at 6 V.
  • 1 point. Checks consistency with the graph slope.

Version 2

A resistor is tested at three potential differences. The measured pairs (current, voltage) are (0.125 A, 2 V), (0.25 A, 4 V), and (0.375 A, 6 V).

  1. Part A. Describe a graph that tests whether the device is ohmic. State the expected shape and slope meaning.
  2. Part B. Use the graph model to write the governing equation and calculate the three currents.
  3. Part C. Explain how increasing voltage changes current, then calculate power at 6 V and check it against the graph.
Show the rubric and solution

Part A: 4 points

Plot voltage vertically against current horizontally. An ohmic resistor gives a straight line through the origin.

The slope deltaV/deltaI is the resistance, 16 ohms.

  • 1 point. Chooses voltage versus current axes.
  • 1 point. Identifies a straight line through the origin.
  • 1 point. Connects graph slope to resistance.
  • 1 point. Calculates the graph slope.

Part B: 4 points

Ohm's law is V = IR. With R = 16 ohms, the currents are 0.125 A, 0.25 A, and 0.375 A.

The equal ratios V/I show that the same linear model describes all three points.

  • 1 point. Writes Ohm's law.
  • 1 point. Calculates the first current.
  • 1 point. Calculates the second current.
  • 1 point. Calculates the third current.

Part C: 4 points

For constant resistance, current rises in direct proportion to voltage.

P = VI = (6 V)(0.375 A) = 2.25 W. The graph also gives V/I = 16 ohms.

  • 1 point. Relates voltage and current proportionally.
  • 1 point. Uses the electrical power equation.
  • 1 point. Calculates power at 6 V.
  • 1 point. Checks consistency with the graph slope.

Keep going