Torque and Rotational Motion Worksheet with Answer Key
11 problems on torque and rotational motion, ready to print for class or homework. The answer key prints on its own page, so hand out everything before it.
Name: ______________________________ Date: ______________ Period: ______
1. A wrench pulled straight, then pulled at an angle
You pull on a wrench handle at a point 0.45 m from the center of the bolt, with a force of 60.0 N. (a) Find the torque about the bolt when the pull is perpendicular to the handle. (b) Find the torque when the same 60.0 N is applied at to the handle. (c) Find the lever arm in case (b) and use it to reproduce the torque.
2. Two ropes, one wheel, one net torque
A wheel turns freely about a fixed axle through its center. A rope wound around the rim, at radius 0.30 m, is pulled tangentially with 25 N in the sense that would turn the wheel clockwise. A second rope wound around an inner hub, at radius 0.12 m, is pulled tangentially with 45 N in the counterclockwise sense. Find the net torque on the wheel and the sense in which it starts to turn.
3. Spinning a rotor up from rest
A centrifuge rotor starts from rest and reaches an angular velocity of 90.0 rad/s in 15.0 s under constant angular acceleration. Find (a) the angular acceleration, (b) the angle it turns through in that time, and (c) the number of complete revolutions.
4. A seesaw whose pivot is not in the middle
A uniform plank 3.6 m long and of mass 8.0 kg rests on a pivot placed 1.2 m from its left end. A 25 kg child sits on the extreme left end. How far to the right of the pivot must a 15 kg child sit for the plank to stay horizontal and still? Use .
5. Rotational inertia of a loaded rod, about two axes
Two 0.60 kg balls are fixed at the two ends of a uniform rod of mass 0.40 kg and length 0.90 m. Treat the balls as point objects, and take every axis below as perpendicular to the rod. You are given that a uniform rod's rotational inertia about an axis through its center is . Find (a) the rotational inertia of the two balls alone about the center axis, (b) the rotational inertia of the whole assembly about the center axis, and (c) the rotational inertia about an axis through one end, first with the parallel axis theorem and then by direct summation.
6. A winch, from torque to rope speed
A rope is wound around a winch drum of radius 0.16 m whose rotational inertia about its axle is . The drum starts at rest. The rope is pulled with a constant 30 N force tangential to the drum, while the bearings exert a constant frictional torque of opposing the rotation. Find (a) the angular acceleration, (b) the angular velocity after 3.0 s, (c) the speed of the rope at that instant, and (d) the length of rope unwound during the 3.0 s.
7. A beam on two supports, with the person near the end
A uniform beam of mass 24 kg and length 5.0 m lies horizontally across two supports: one at its left end, the other 4.0 m from the left end. A 60 kg person stands 4.5 m from the left end. Find the upward force each support exerts. Use .
8. Angular impulse spinning up a flywheel
A flywheel with rotational inertia about its axle sits at rest. A motor applies a constant torque of for 6.0 s, and bearing friction is negligible. Find (a) the angular impulse delivered, (b) the flywheel's angular momentum and angular velocity at the end of the push, and (c) its rotational kinetic energy, checked against the work the torque did.
9. The spinning skater pulls her arms in
A skater spins on frictionless ice at 1.5 rad/s with her arms and one leg extended, giving a rotational inertia of about her vertical spin axis. She pulls everything in close to her body, dropping her rotational inertia to . Find (a) her new angular velocity, (b) her rotational kinetic energy before and after, and (c) where the change in kinetic energy came from.
10. A child jumps onto a stationary roundabout
A playground roundabout is a uniform disk of mass 120 kg and radius 1.50 m, free to turn about a frictionless vertical axle through its center, and initially at rest. Its rotational inertia about that axle is . A 30 kg child runs at 4.0 m/s along a line tangent to the rim and jumps on at the very edge, holding on. Find (a) the roundabout's rotational inertia, (b) the child's angular momentum about the axle just before landing, (c) the angular velocity of child and roundabout just after, (d) the child's speed just after, and (e) the kinetic energy lost in the landing.
11. Why it matters where you push on a gate
A garden gate 1.2 m wide is hinged along one edge. Using torque, explain why an 18 N push applied at the latch edge swings it easily, why the same 18 N applied 0.30 m from the hinge barely moves it, and why a push directed along the gate straight at the hinge does nothing at all however hard you push. Support the argument with the three torques.
From physicslearn.org/worksheets/torque-and-rotational-motion-worksheet. Free to print and copy for classroom use.
Torque and Rotational Motion: answer key
(a) . (b) . (c) The lever arm is , and multiplying it by 60.0 N reproduces the part (b) torque. The angled pull is worth 64.3 percent of the perpendicular one.
clockwise. The 45 N pull is nearly twice the force but acts at 0.40 of the radius, so it produces the smaller torque and loses.
(a) . (b) . (c) revolutions, so 107 complete ones.
The 15 kg child must sit from the pivot on the right, about 1.7 m. Because every torque comes from a weight, cancels out of the balance entirely, and the plank's own 8.0 kg matters only because the pivot is off center.
(a) . (b) . (c) , the same from the parallel axis theorem and from summing term by term. Moving the axis from the center to the end multiplies the rotational inertia by 2.2.
(a) . (b) . (c) The rope moves at . (d) of rope comes off the drum.
The left support pushes up with and the support at 4.0 m with , together the full 823.2 N of weight. The left force is nearly zero because the person is standing 0.1 m short of the position that would tip the beam off that support.
(a) Angular impulse . (b) and . (c) , which matches the work over the 22.5 rad turned, to the joule.
(a) , three times faster. (b) 6.075 J before, 18.225 J after. (c) From the skater: she does 12.15 J of work pulling mass toward the axis. Her angular momentum holds at throughout, because nothing outside her exerts a torque about the spin axis.
(a) . (b) . (c) . (d) The child now moves at . (e) The system keeps 80.0 J of the original 240 J, so 160 J is lost. Angular momentum is conserved through the landing; kinetic energy is not.
Because torque is what starts a rigid body turning, and torque is . The same 18 N gives at the latch edge, at 0.30 m from the hinge (a quarter of the distance, so a quarter of the torque), and exactly zero when aimed along the gate at the hinge, because then the force has no component perpendicular to the position vector and its line of action passes through the axis, making the lever arm zero. Since and the gate's rotational inertia is the same in all three cases, the angular accelerations stand in the same ratio as the torques.
Every step is worked at physicslearn.org/practice/torque-and-rotational-motion. Free to print and copy for classroom use.
The key gives final answers only. The full worked solution for each problem is on the matching practice set, and every other sheet is on the worksheets page.