AP Physics C E&M · Mathematical Routines

Charging RC circuit: AP Physics C E&M FRQ Practice

2 versions of one AP Physics C E&M free-response question of the Mathematical Routines type, each with a 10-point rubric and a full solution. Write your response on paper before you open the rubric.

These are PhysicsLearn originals written in the AP style, not released exam questions. Topics: 11.8 Resistor Capacitor (RC) Circuits.

Version 1

An uncharged 4 microfarad capacitor is connected in series with a 10 kilohm resistor and an ideal 6 V battery at t = 0.

  1. Part A. State the capacitor voltage immediately after connection and calculate the initial current.
  2. Part B. Derive the circuit time constant and calculate maximum capacitor charge.
  3. Part C. At t = tau, calculate capacitor charge, circuit current, and capacitor voltage.
Show the rubric and solution

Part A: 3 points

An initially uncharged capacitor has zero voltage at t = 0 immediately after the switch closes.

The initial current is V/R = 6.000000e-4 A.

  • 1 point. States the initial capacitor voltage.
  • 1 point. Calculates the initial current.
  • 1 point. Recognizes the capacitor initially behaves like a wire.

Part B: 3 points

tau = RC = 0.04 s.

The charging model is q = CV(1 - e^(-t/RC)), with maximum charge CV = 2.400000e-5 C.

  • 1 point. Writes the RC time-constant equation.
  • 1 point. Calculates the time constant.
  • 1 point. Calculates maximum charge.

Part C: 4 points

q(tau) = CV(1 - e^-1) = 1.517089e-5 C.

i(tau) = (V/R)e^-1 = 2.207277e-4 A and Vc(tau) = V(1 - e^-1) = 3.793 V.

  • 1 point. Calculates charge at one time constant.
  • 1 point. Uses the exponential charging model.
  • 1 point. Calculates current at one time constant.
  • 1 point. Calculates capacitor voltage at one time constant.

Version 2

An uncharged 8 microfarad capacitor is connected in series with a 18 kilohm resistor and an ideal 10 V battery at t = 0.

  1. Part A. State the capacitor voltage immediately after connection and calculate the initial current.
  2. Part B. Derive the circuit time constant and calculate maximum capacitor charge.
  3. Part C. At t = tau, calculate capacitor charge, circuit current, and capacitor voltage.
Show the rubric and solution

Part A: 3 points

An initially uncharged capacitor has zero voltage at t = 0 immediately after the switch closes.

The initial current is V/R = 5.555556e-4 A.

  • 1 point. States the initial capacitor voltage.
  • 1 point. Calculates the initial current.
  • 1 point. Recognizes the capacitor initially behaves like a wire.

Part B: 3 points

tau = RC = 0.144 s.

The charging model is q = CV(1 - e^(-t/RC)), with maximum charge CV = 8.000000e-5 C.

  • 1 point. Writes the RC time-constant equation.
  • 1 point. Calculates the time constant.
  • 1 point. Calculates maximum charge.

Part C: 4 points

q(tau) = CV(1 - e^-1) = 5.056964e-5 C.

i(tau) = (V/R)e^-1 = 2.043775e-4 A and Vc(tau) = V(1 - e^-1) = 6.321 V.

  • 1 point. Calculates charge at one time constant.
  • 1 point. Uses the exponential charging model.
  • 1 point. Calculates current at one time constant.
  • 1 point. Calculates capacitor voltage at one time constant.

Keep going