Work, Energy and Power Worksheet with Answer Key

12 problems on work, energy and power, ready to print for class or homework. The answer key prints on its own page, so hand out everything before it.

  1. 1. Work done by a force along the motion

    A worker pushes a 24 kg crate 7.5 m in a straight line across a level floor with a constant 62 N horizontal force. Find the work the worker does on the crate, and the work done on it by gravity and by the normal force.

  2. 2. Work at an angle, and a negative-work case

    A 19 kg suitcase is pulled 11 m in a straight line along a level floor by a strap held at 32∘32^\circ above the horizontal, with a constant tension of 45 N. A constant 13 N friction force opposes the motion. Find the work done on the suitcase by the strap, by friction, by gravity and by the normal force, then the net work.

  3. 3. The work-energy theorem instead of kinematics

    A 1450 kg car speeds up from 18 m/s to 27 m/s along a straight level road, covering 140 m while it does so. Find the net work done on the car and the average net force acting on it over that stretch.

  4. 4. Gravitational potential energy, and why the zero does not matter

    A 2.6 kg book is lifted from the floor onto a shelf 1.9 m above it, then later moved down to a second shelf 0.8 m above the floor. Find the change in gravitational potential energy of the book-Earth system for each move and for the two moves combined. Then state what changes if you had put the zero of potential energy at the upper shelf instead of the floor.

  5. 5. Elastic potential energy in a spring

    A spring with force constant k=180 N/mk = 180\ \text{N/m} is compressed 0.24 m from its natural length. (a) Find the elastic potential energy stored in it. (b) How far would you have to compress the same spring to store twice that energy?

  6. 6. Conservation of energy on a frictionless track

    A 0.42 kg cart is released from rest at the top of a frictionless track, 1.35 m above the bottom. Find its speed at the bottom of the track, and its speed as it passes a point 0.55 m above the bottom. State whether the shape of the track between those points matters.

  7. 7. A spring launcher: two stores in one motion

    A spring with force constant k=260 N/mk = 260\ \text{N/m} is compressed 0.18 m against a 0.75 kg cart resting on a frictionless horizontal track. The cart is released, leaves the spring at the spring's natural length, and then runs onto a frictionless ramp that curves upward. Find the cart's speed as it leaves the spring, and the maximum height it reaches on the ramp.

  8. 8. A rough ramp, where mechanical energy is not conserved

    A 3.2 kg box is released from rest at the top of a ramp and slides down to the bottom, dropping 1.6 m in height along a 4.0 m path on the ramp surface. It arrives at the bottom moving at 4.1 m/s. Find how much mechanical energy was dissipated, the average friction force on the box, and the speed it would have reached on the same ramp with no friction.

  9. 9. Average power on a climb

    A 68 kg firefighter climbs a vertical ladder 8.4 m high at a steady pace, taking 12 s. (a) Find the work done against gravity and the average power developed. (b) A second firefighter of the same mass climbs the same ladder in 18 s. Find the work and the average power for that climb, and say which quantity changed.

  10. 10. Instantaneous power from a force at an angle

    A tow truck pulls a broken-down car along a level road at a constant 12 m/s. The tow cable is straight and makes an angle of 22∘22^\circ with the road, and the tension in it is 1900 N. (a) Find the instantaneous power the cable delivers to the car. (b) Find the work the cable does in 30 s of towing. (c) State the net power delivered to the car, and explain the value.

  11. 11. Spring, rough patch and ramp in one motion

    A 1.6 kg block is pressed against a spring of force constant k=540 N/mk = 540\ \text{N/m}, compressing it 0.12 m, on a horizontal surface. The block is released. It leaves the spring, crosses a rough patch 0.85 m long where the coefficient of kinetic friction is μk=0.15\mu_k = 0.15, and then runs onto a frictionless ramp. Find the block's speed when it leaves the rough patch and the maximum height it reaches on the ramp.

  12. 12. Explain why: a perpendicular force does no work

    A ball on a light string is whirled in a horizontal circle at constant speed on a frictionless table, and separately a crate slides in a straight line across a level floor. In the first case the string tension does no work on the ball; in the second the normal force does no work on the crate. Explain why in both cases, and say what a perpendicular force does change.

Work, Energy and Power: answer key

  1. The worker does 465 J465\ \text{J} of work, and gravity and the normal force each do zero. If the crate were dragged back over the same 7.5 m while the worker kept pushing the original way, that same push would do −465 J-465\ \text{J}: the force did not change, the displacement reversed, and the angle between them went from 0∘0^\circ to 180∘180^\circ.

  2. Wstrap=+4.2×102 JW_{\text{strap}} = +4.2 \times 10^2\ \text{J}, Wfriction=−1.4×102 JW_{\text{friction}} = -1.4 \times 10^2\ \text{J}, Wgravity=0W_{\text{gravity}} = 0, Wnormal=0W_{\text{normal}} = 0, and Wnet=+2.8×102 JW_{\text{net}} = +2.8 \times 10^2\ \text{J}. Three different angles between force and displacement give three different signs: 32∘32^\circ gives positive work, 180∘180^\circ gives negative, and 90∘90^\circ gives none.

  3. Wnet=2.9×105 JW_{\text{net}} = 2.9 \times 10^5\ \text{J} and Fnet=2.1×103 NF_{\text{net}} = 2.1 \times 10^3\ \text{N} forwards. The energy route skipped acceleration entirely. It also survives a stretch of road where the force is not constant, which the kinematic equations do not, since only the average matters to the work.

  4. ΔU1=+48 J\Delta U_1 = +48\ \text{J}, ΔU2=−28 J\Delta U_2 = -28\ \text{J}, and ΔUtotal=+20 J\Delta U_{\text{total}} = +20\ \text{J}. Relocating the zero shifts every stored value by a fixed amount and changes none of the three answers. If a solution of yours ever depends on where you put the zero, you have used an absolute UgU_g somewhere a difference belonged.

  5. (a) Us=5.2 JU_s = 5.2\ \text{J}. (b) 0.34 m0.34\ \text{m}, which is 2\sqrt{2} times the original compression rather than twice it. That squared dependence is why the last centimetre of compression on a stiff spring stores far more than the first.

  6. v=5.14 m/sv = 5.14\ \text{m/s} at the bottom and 4.0 m/s4.0\ \text{m/s} at the 0.55 m point. The 0.42 kg cancels and never affects either speed. The shape of the track does not matter, only the height dropped, which is the practical payoff of gravity being a conservative force.

  7. The cart leaves the spring at 3.4 m/s3.4\ \text{m/s} and climbs to 0.57 m0.57\ \text{m} above the track. The same 4.2 J appears in three forms in turn, and you can jump straight from the first to the third if the middle one is not asked for. The ramp's angle never entered the calculation.

  8. 23 J23\ \text{J} of mechanical energy was dissipated, the average friction force was 5.8 N5.8\ \text{N}, and a frictionless ramp would have delivered the box at 5.6 m/s5.6\ \text{m/s} rather than 4.1 m/s. Friction removed 46 percent of the kinetic energy the box would otherwise have arrived with, yet cost it only 1.5 m/s of speed, because kinetic energy goes with the square of the speed.

  9. (a) W=5.6×103 JW = 5.6 \times 10^3\ \text{J} and Pavg=4.7×102 WP_{\text{avg}} = 4.7 \times 10^2\ \text{W}. (b) The same 5.6×103 J5.6 \times 10^3\ \text{J} of work, but only 3.1×102 W3.1 \times 10^2\ \text{W}. Work counts the energy moved; power counts how fast you moved it. Both firefighters did the same job and only one of them did it quickly.

  10. (a) 2.1×104 W2.1 \times 10^4\ \text{W}, about 21 kW. (b) 6.3×105 J6.3 \times 10^5\ \text{J}. (c) Zero net power, because the speed is constant and so the kinetic energy is not changing. Angling the cable at 22∘22^\circ costs about 7 percent of the power the same tension would deliver along the road, since cos⁡22∘=0.927\cos 22^\circ = 0.927.

  11. The block leaves the rough patch at 1.5 m/s1.5\ \text{m/s} and climbs to 0.12 m0.12\ \text{m} on the ramp. Of the 3.9 J the spring stored, 2.0 J went to thermal energy in the rough patch and 1.9 J made it to the top of the climb. Removing the rough patch would have more than doubled the height, to 3.888/15.68=0.25 m3.888/15.68 = 0.25\ \text{m}.

  12. Both forces are perpendicular to the displacement, and W=Fdcos⁡90∘=0W = Fd\cos 90^\circ = 0. Essential knowledge 3.2.A.3.i says only the parallel component changes the system's total energy, and 3.2.A.3.ii says the perpendicular component can change the direction of the motion without changing the kinetic energy. A perpendicular force steers rather than speeds up, which is why the string can hold a ball in a circle at unchanging speed and why the normal force can be dropped from any energy equation.

The key gives final answers only. The full worked solution for each problem is on the matching practice set, and every other sheet is on the worksheets page.